Related Experiment Video
Updated: Jun 13, 2025

Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
Published on: August 15, 2014
Sub-Boltzmann Switching, Hysteresis-Free Charge Modulated Negative Differential Resistance FinFET
Juho Sung1, Sanghyun Kang1, Donghwan Han2,3
1Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon 16419, Korea.
Abstract:
The ever-increasing power consumption in integrated circuits has raised concerns about the relentless doubling of transistor density in chips and cost drop per combinational/sequential circuits. To address the physical limit of thermionic emission carrier transport (i.e., subthreshold swing >60 mV/decade at 300 K), alternative charge-transport mechanisms or the implementation of functional substances have been attempted but without appreciable success. One such choice is to take advantage of negative differential resistance with the activation of localized electrons or migration of atom and oxygen vacancies to extend the capabilities of Si-transistors. However, inconsistency in current during forward/reverse bias sweep is confronted as a notable weak point. This work proposes an eye-catching solution to modulating potential distribution between a resistance switching layer and a transistor by employing charge trapping within a hafnium zirconium oxide layer. This approach introduces features advancing the potential of "More Moore" technologies.
Related Concept Videos
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
Field Effect Transistor
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...

