Related Experiment Video
Updated: Apr 13, 2026

Design and Characterization Methodology for Efficient Wide Range Tunable MEMS Filters
Published on: February 4, 2018
A Bias-Tunable Multispectral Photodetector Based on a GaN/TexSe1- x Homo-Type Heterojunction with a Unidirectional
Weijie Liu1, Meng Peng1, Maohua Chen1
1Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, China.
Abstract:
Multispectral detection technology captures characteristic spectral information across various wavebands, exhibiting substantial application potential. However, most currently reported multispectral photodetectors rely on intricate dual- or multi-junction structures, severely limiting material thickness, doping concentration, and band alignment design, thereby impeding widespread adoption. In this study, a bias-tunable multispectral photodetector featuring a straightforward single-junction design is introduced. The device comprises a TexSe1- x/GaN homo-type heterojunction with a unidirectional barrier. This structure effectively suppresses the majority-carrier dark current, yielding a low reverse dark current of ≈10-12 A and a high rectification ratio of up to 105. By adjusting the bias polarity and magnitude, the spectral response range of the device can be broadened from ultraviolet (UV) to short-wave infrared. Notably, the photodetection performance is exceptional: at 0 V bias, the device exhibits a responsivity of 0.25 A W-1 and a specific detectivity of 5.04 × 1011 cm Hz1/2 W-1 under 365 nm illumination; at -2 V bias, it achieves a responsivity of 0.58 A W-1 and a specific detectivity of 2.64 × 109 cm Hz1/2 W-1 under 1060 nm illumination. Leveraging the bias-tunable spectral response characteristic of the device, proof-of-concept imaging is successfully demonstrated. This research presents a simplified and economical method for fabricating multispectral photodetectors.
Related Concept Videos
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...

