Global exact prescribed-time output feedback stabilization of a class of nonlinear systems with measurement
Yihao Wang1, Kang-Kang Zhang2, Huaiyuan Jiang3
1Zhengzhou Advanced Research Institute of Harbin Institute of Technology, Zhengzhou 450000, China.
Abstract:
This article addresses the global exact prescribed-time output feedback stabilization problem for a class of nonlinear systems subject to measurement uncertainty and unknown nonlinearities. Unlike many prescribed-time control results, where the theoretical analysis does not exclude the possibility of convergence before the prescribed time, the exact prescribed-time convergence considered in this paper further characterizes the non-premature convergence: nonzero closed-loop trajectories approach the origin at the prescribed time in the limiting sense and do not vanish before that time. To achieve this guarantee, the proposed approach employs the solutions of the parametric Lyapunov equations (PLEs) as the central analytical tool and fully exploits their properties, in conjunction with time-varying Lyapunov-like functions, to construct a linear observer-based output feedback control strategy. A salient feature of the proposed scheme is that it relies exclusively on linear time-varying gains. Finally, two numerical case studies, including comparisons with existing methods, are provided to demonstrate the effectiveness of the proposed approach.
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length, the...
Effects of feedback
Feedback significantly modifies the gain of a control system. The gain of a system without feedback is altered by a factor of one plus GH, where G represents...
Linear time-invariant Systems
The input-output behavior of an LTI system can be fully defined by its response to an impulsive excitation at its input. Once this impulse response is known, the system's reaction to any other input can be calculated...
Classification of Systems-II
Second Order systems II
If ζ...

