Functionally Graded Materials by Wire Arc Additive Manufacturing: Material-Pair Compatibility and Spatial Mechanical...

Functionally Graded Materials (FGMs) vary in composition and properties for tailored structural performance. Additive Manufacturing (AM), particularly Wire Arc Additive Manufacturing (WAAM), offers a scalable route to metallic FGMs, but manufacture and mechanical qualification remain disconnected. Scopus and Web of Science Core Collection were searched for eligible publications up to and including 31 July 2026. The review includes 176 studies, and every conclusion is graded by a review-specific certainty scheme and bounded to this corpus. The review connects FGM manufacture with full-field inverse identification of spatially varying properties. Evidence indicates interface-defect risk depends on metallurgical compatibility and the composition path. Intermetallic-forming or thermally mismatched pairs remain vulnerable despite process optimisation. Stainless-steel-Ni-superalloy combinations are more frequently reported as sound but only within the composition intervals validated in the cited builds: this apparent advantage reflects unequal study numbers and cracking in specific composition windows. A four-stage sequence-screening phase stability and thermal-expansion mismatch before optimising deposition parameters, then validating the complete composition path-is proposed as an evidence-informed framework rather than a validated decision map. Conventional tests generally provide averaged or location-specific properties rather than a continuous constitutive gradient. Digital image correlation coupled with inverse identification methods can enable the determination of spatially varying properties from a heterogeneous test. However, no experimental study identified a spatial constitutive law across a deliberate WAAM compositional gradient.