Multi-step microfluidic droplet processing: kinetic analysis of an in vitro translated enzyme

Microdroplets in water-in-oil emulsions can be used as microreactors with volumes 10(3) to 10(9) times smaller than the smallest working volumes in a microtitre plate well (1-2 microL). However, many reactions and assays require multiple steps where new reagents are added at defined times, to start, modify or terminate a reaction. The most flexible way to add new reagents to pre-formed droplets is by controlled, pairwise droplet fusion. We describe a droplet-based microfluidic system capable of performing multiple operations, including pairwise droplet fusion, to analyze complex and sequential multi-step reactions. It is exemplified by performing a series of six on-chip and two off-chip operations which enable the coupled in vitro transcription and translation of cotA laccase genes in droplets and, after performing a controlled fusion with droplets containing laccase assay reagents, the end-point and kinetic analysis of the catalytic activity of the translated protein. In vitro translation and the laccase assay must be performed sequentially as the conditions for the laccase assay are not compatible with in vitro translation. Droplet fusion was performed by electrocoalescence at a rate of approximately 3000 fusion events per second and nearly 90% of droplets were fused one-to-one (one droplet containing in vitro translated laccase fused to one droplet containing the reagents for the laccase assay). The ability to uncouple the enzymatic assay from in vitro translation greatly extends the range of activities of in vitro translated proteins that can potentially be screened in droplet-based microfluidic systems. Furthermore, the system also opens up the possibility of performing a wide range of other new (bio)chemical reactions in droplets.