Iron nanofibers synthesized by the electrospinning method for use as a GHz band electromagnetic wave absorber

In this study, we fabricated Fe nanofibers that had a high aspect ratio and were coated by an oxidation protection layer, because electromagnetic properties are affected by the aspect ratio and oxidized layers. PVP/Fe salt nanofibers were prepared by an electrospinning method using an optimized concentration of PVP solution with Iron(lll) nitrate nonahydrate (Fe (NO3)3.9H2O) solution to apply a high voltage. Subsequently, to prepare the Fe nanofibers, the PVP/Fe salt nanofibers were heated up to 600 degrees C in air and reduced to 450 degrees C in H2. The Fe nanofibers were then coated by PVP to prevent re-oxidation. The S-parameter of the prepared Fe nanofibers was measured by a network analyzer, and the power loss was calculated to estimate the EM absorption ability.