Related Experiment Video
Updated: Dec 1, 2025

Silicon Metal-oxide-semiconductor Quantum Dots for Single-electron Pumping
Published on: June 3, 2015
Robust and Latch-Up-Immune LVTSCR Device with an Embedded PMOSFET for ESD Protection in a 28-nm CMOS Process
Ruibo Chen1, Hongxia Liu2, Wenqiang Song3
1Key Laboratory for Wide-Band Gap Semiconductor Materials and Devices of Education, School of Microelectronics, Xidian University, Xi'an, 710071, China.
Abstract:
Low-voltage-triggered silicon-controlled rectifier (LVTSCR) is expected to provide an electrostatic discharge (ESD) protection for a low-voltage integrated circuit. However, it is normally vulnerable to the latch-up effect due to its extremely low holding voltage. In this paper, a novel LVTSCR embedded with an extra p-type MOSFET called EP-LVTSCR has been proposed and verified in a 28-nm CMOS technology. The proposed device possesses a lower trigger voltage of ~ 6.2 V and a significantly higher holding voltage of ~ 5.5 V with only 23% degradation of the failure current under the transmission line pulse test. It is also shown that the EP-LVTSCR operates with a lower turn-on resistance of ~ 1.8 Ω as well as a reliable leakage current of ~ 1.8 nA measured at 3.63 V, making it suitable for ESD protections in 2.5 V/3.3 V CMOS processes. Moreover, the triggering mechanism and conduction characteristics of the proposed device were explored and demonstrated with TCAD simulation.
More Related Videos
Related Concept Videos
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...

