Related Experiment Video
Updated: May 23, 2025

Nanofabrication of Gate-defined GaAs/AlGaAs Lateral Quantum Dots
Published on: November 1, 2013
High Hole Mobility van der Waals Junction Field-Effect Transistors Based on Te/GaAs for Multimode Photodetection and
Fei Li1,2, Jiang Zeng1,2, Yiming Zhao1,2
1School of Semiconductor Science and Technology, South China Normal University, Foshan 528225, P.R. China.
Abstract:
Recently, interface scattering and low mobility have significantly impeded the performance of two-dimensional (2D) P-type transistors. 2D semiconductor tellurium (Te) has garnered significant interest owing to its unique atomic chain crystal structure, which confers ultrahigh hole mobility. van der Waals heterojunction enhances transistor performance by reducing scattering at the gate-channel interface, attributed to its high-quality interface. In this study, we present Te/gallium arsenide (GaAs) hybrid dimensional JFETs exhibiting sizable on-state currents, elevated transconductance, and mobility as high as 328.4 cm2V-1s-1. Achieving a low-power device, we lowered the threshold voltage from 1.9 to 1 V by modifying the carrier concentration of the gate. Furthermore, enhancing negative photoconductivity on the Te surface is achieved by tuning the depth of the channel depletion region, thereby achieving an enhanced negative photoconductivity mechanism with universal applicability. Based on this, a photodetector featuring both positive and negative photoconductivity and a photovoltaic effect was developed. The negative photoresponsivity and detectivity at 635 nm of the device are -64 AW-1 and 1.41 × 1010 Jones, respectively. Utilizing these properties, we develop Te/GaAs JFET-based logic gate circuits and single-point negative photoconductive imaging applications. This provides a potential research avenue for future logic circuits and optoelectronic devices.
Related Concept Videos
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Field Effect Transistor
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
Types of Semiconductors

